Following is a slightly cleaned up script of an install session, during which all the software, documentation and tables were loaded as well as the processed data from a single day (1987141). This would be adequate to experiment with the programs and data. It requires about 22 Mbytes of disk space. Script started on Thu Aug 6 12:52:25 1992 overend% /usr/etc/extract_unbundled Enter media drive location [local | remote]: remote Enter hostname of remote drive: hinault Enter Device Name (e.g. rst0, rmt0, rfd0c) : /dev/rst0 **Please mount the release media if you haven't done so already.** Press return when ready: The following product will be installed: 0+1 records in 0+1 records out *********************************************************************** This tape contains the seismic data collected near the Kazakh nuclear test site at Semipalatinsk in the former Soviet Union during 1987. The Natural Resources Defense Council sponsored the collection of these data. The information contained on this tape was collected and generated by IRIS' Joint Seismic Program Center at the University of Colorado at Boulder. *********************************************************************** Do you want to continue [y|n]? y /usr/etc/extract_unbundled : Extracting Installation Scripts x Extract, 1375 bytes, 3 tape blocks x README, 2062 bytes, 5 tape blocks x SCCS/s.Extract, 1523 bytes, 3 tape blocks x SCCS/p.Extract, 31 bytes, 1 tape blocks x SCCS/p.install_unbundled, 31 bytes, 1 tape blocks x SCCS/s.install_unbundled, 10407 bytes, 21 tape blocks x days, 753 bytes, 2 tape blocks x install_unbundled, 9481 bytes, 19 tape blocks x intro, 664 bytes, 2 tape blocks x proc_channels, 321 bytes, 1 tape blocks x raw_channels, 661 bytes, 2 tape blocks x stations, 63 bytes, 1 tape blocks x tapefile1.contents, 490 bytes, 1 tape blocks x tapefile2.contents, 151 bytes, 1 tape blocks x tapefile3.contents, 23485 bytes, 46 tape blocks x tapefile4.contents, 10584 bytes, 21 tape blocks x tapefile5.contents, 369778 bytes, 723 tape blocks x tapefile6.contents, 1050081 bytes, 2051 tape blocks 24+0 records in 24+0 records out /usr/etc/extract_unbundled : Begin Install Script Execution JSPC SOVIET NRDC DATA PRODUCT Installation Script This script may be used to extract all or part of the contents of the JSPC SOVIET NRDC DATA PRODUCT. You will probably want to load just parts of this data product. Following are approximate sizes of the various options: Size in Mbytes Documentation 5 Software 9 (with SPARC binaries) 3 (without binaries) Table Data 1 Processed Data 450 (920 Mbytes uncompressed) Raw Data 482 (1.3 Gbytes uncompressed) The script will also let you load subsets of the raw and processed data. In what directory do you want to load things? [/var/tmp/unbundled] /spc/slice1 Options: 0) Extract documentation *** Do this first! *** (Description of contents, installation instructions, etc) 1) Extract software (documentation, source code and Sun4 programs to manipulate data) 2) Extract CSS tables required for some software above (wfdisc, sensor, instrument, sitechan, ...) 3) Extract (subset of) processed data (wfdisc files and waveform files in sac format) * REQUIRES CSS tables (step 2) 4) Extract (subset of) raw data (wfdisc files and waveform files in raw format) * REQUIRES CSS tables (step 2) 5) Extract everything q) Quit Your choice: 5 Extracting files from tape; this will take some time... + rsh hinault mt -f /dev/nrst0 rew ; mt -f /dev/nrst0 fsf 2 ; dd if=/dev/nrst0 bs=126b + tar xvfbB - 126 x nrdc/doc/install.ms, 10323 bytes, 21 tape blocks x nrdc/doc/man.ps, 627134 bytes, 1225 tape blocks x nrdc/doc/man.index, 3925 bytes, 8 tape blocks x nrdc/doc/tech_report.ms.ps, 237802 bytes, 465 tape blocks x nrdc/doc/schema.ps, 254684 bytes, 498 tape blocks 18+0 records in 18+0 records out + set +x Do you want sun4 binaries? y Extracting files from tape; this will take some time... + tar xvfbB - 126 -I /tmp/select5026 + rsh hinault mt -f /dev/nrst0 rew ; mt -f /dev/nrst0 fsf 3 ; dd if=/dev/nrst0 bs=126b x nrdc/sw/src/bin/db2sac/Makefile, 629 bytes, 2 tape blocks x nrdc/sw/src/bin/db2sac/db2.c, 18218 bytes, 36 tape blocks ... x nrdc/sw/sun4/lib/libscv.a, 93196 bytes, 183 tape blocks x nrdc/sw/sun4/lib/libstock.a, 14972 bytes, 30 tape blocks x nrdc/sw/sun4/lib/libtbl.a, 31640 bytes, 62 tape blocks 134+0 records in 134+0 records out + set +x Extracting files from tape; this will take some time... + tar xvfbB - 126 + rsh hinault mt -f /dev/nrst0 rew ; mt -f /dev/nrst0 fsf 4 ; dd if=/dev/nrst0 bs=126b x nrdc/data/tables/nrdc.resp/54100.1.rsp, 961 bytes, 2 tape blocks x nrdc/data/tables/nrdc.resp/54100.2.rsp, 1003 bytes, 2 tape blocks ... x nrdc/data/tables/nrdc.resp/S1.8.rsp, 953 bytes, 2 tape blocks x nrdc/data/tables/nrdc.resp/S1.9.rsp, 953 bytes, 2 tape blocks x nrdc/data/tables/nrdc.resp/S6000.1.rsp, 727 bytes, 2 tape blocks x nrdc/data/tables/nrdc.sitechan, 24252 bytes, 48 tape blocks x nrdc/data/tables/nrdc.sensor, 44800 bytes, 88 tape blocks x nrdc/data/tables/nrdc.site, 1248 bytes, 3 tape blocks x nrdc/data/tables/nrdc.network, 276 bytes, 1 tape blocks x nrdc/data/tables/nrdc.arrival, 139552 bytes, 273 tape blocks x nrdc/data/tables/nrdc.instrument, 13920 bytes, 28 tape blocks x nrdc/data/tables/nrdc.affiliation, 272 bytes, 1 tape blocks x nrdc/data/tables/nrdc.assoc, 32589 bytes, 64 tape blocks x nrdc/data/tables/nrdc.sregion, 49572 bytes, 97 tape blocks x nrdc/data/tables/nrdc.moment, 14472 bytes, 29 tape blocks x nrdc/data/tables/nrdc.vmodel/kazakh1, 39495 bytes, 78 tape blocks x nrdc/data/tables/nrdc.origin, 31892 bytes, 63 tape blocks x nrdc/data/tables/nrdc.centryd, 9720 bytes, 19 tape blocks x nrdc/data/proc/1987078/1987078.wfdisc, 1704 bytes, 4 tape blocks x nrdc/data/proc/1987079/1987079.wfdisc, 6816 bytes, 14 tape blocks ... x nrdc/data/raw/1987247/1987247.wfdisc, 76680 bytes, 150 tape blocks 125+0 records in 125+0 records out + set +x Select a subset of the data by specifying a day, a station and a channel. At each prompt below, you may enter a) a single day, station, or channel b) to select all days, stations or channels c) for days, a range: 1987078 1987122 d) for channels, a regular expression: ...Z (selects all z-component channels) Possible (Julian) Days: 1987113 1987132 1987143 1987159 1987178 1987239 1987078 1987114 1987133 1987144 1987160 1987183 1987240 1987079 1987115 1987134 1987145 1987161 1987230 1987241 1987080 1987116 1987135 1987146 1987162 1987231 1987242 1987083 1987117 1987136 1987147 1987163 1987232 1987243 1987099 1987118 1987137 1987148 1987164 1987233 1987244 1987100 1987119 1987138 1987149 1987165 1987234 1987245 1987101 1987120 1987139 1987150 1987166 1987235 1987246 1987102 1987121 1987140 1987151 1987175 1987236 1987247 1987103 1987122 1987141 1987152 1987176 1987237 1987248 1987111 1987123 1987142 1987153 1987177 1987238 1987112 1987124 Possible Stations: BAY KKL KSU UNR1 UNR2 UNR3 UNR4 UNR5 Possible Processed Data Channels: HBIE HBIN HBIZ HSIE HSIN HSIZ HSSE HSSN HSSZ LBIE LBIN LBIZ LSIE LSIN LSIZ LSSE LSSN LSSZ First Letter: High or Low gain Second Letter: Surface or Borehole Third Letter: Short period or Intermediate period Fourth Letter: North, East, or Z orientation Enter a day (1987145) or a day range (1987078 1987135): 1987141 Enter a station: Enter a channel (HBIE) or regular expression (...Z) : selecting files ... New Selections: 2.1 Mbytes in 70 files Total Selections: 2.1 Mbytes in 70 files Do you want to select more files? n You have selected 2.1 Mbytes in 70 files. Extract these files? y Extracting files from tape; this will take some time... + tar xvfbB - 126 -I /tmp/select5026 + rsh hinault mt -f /dev/nrst0 rew ; mt -f /dev/nrst0 fsf 5 ; dd if=/dev/nrst0 bs=126b x nrdc/data/proc/1987141/sac/1987141050437.00.KKL.HBIN.Z, 29748 bytes, 59 tape blocks x nrdc/data/proc/1987141/sac/1987141050437.00.KKL.HBIZ.Z, 32229 bytes, 63 tape blocks ... x nrdc/data/proc/1987141/1987141.wfdisc, 19596 bytes, 39 tape blocks + set +x The waveform data files are stored on the tape in compressed form. While you CAN run the software with compressed data, the programs are CONSIDERABLY slower. Consequently, we STRONGLY recommend uncompressing the data. It will then use two to three times more space. 6982+0 records in 6982+0 records out Do you wish to uncompress the data now? y Select a subset of the data by specifying a day, a station and a channel. At each prompt below, you may enter a) a single day, station, or channel b) to select all days, stations or channels c) for days, a range: 1987078 1987122 (for days 1987078 through 1987122) d) for channels, a range 1 6 (for channels 1 through 6) Possible (Julian) Days: 1987113 1987132 1987143 1987159 1987178 1987239 1987078 1987114 1987133 1987144 1987160 1987183 1987240 1987079 1987115 1987134 1987145 1987161 1987230 1987241 1987080 1987116 1987135 1987146 1987162 1987231 1987242 1987083 1987117 1987136 1987147 1987163 1987232 1987243 1987099 1987118 1987137 1987148 1987164 1987233 1987244 1987100 1987119 1987138 1987149 1987165 1987234 1987245 1987101 1987120 1987139 1987150 1987166 1987235 1987246 1987102 1987121 1987140 1987151 1987175 1987236 1987247 1987103 1987122 1987141 1987152 1987176 1987237 1987248 1987111 1987123 1987142 1987153 1987177 1987238 1987112 1987124 Possible Stations: BAY KKL KSU UNR1 UNR2 UNR3 UNR4 UNR5 Possible Raw Data Channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 There is an approximate mapping between raw data channels and processed channels. The major difference is that the raw data doea not point precisely in the north or east directions and there are constant randomly timed polarity reversals in the raw data. The mapping is as follows raw proc raw proc 01 HSSE 11 LSIN 02 HSSN 12 LSIZ 03 HSSZ 13 LBIE 04 HBIE 14 LBIN 05 HBIN 15 LBIZ 06 HBIZ 16 HSIE 07 LSSE 17 HSIN 08 LSSN 18 HSIZ 09 LSSZ 10 LSIE Enter a day (1987145) or a day range (1987078 1987135): 1987078 Enter a station: Enter a channel (5) or a channel range (1 6): selecting files ... New Selections: 0.2 Mbytes in 16 files Total Selections: 0.2 Mbytes in 16 files Do you want to select more files? n You have selected 0.2 Mbytes in 16 files. Extract these files? n No files extracted. Options: 0) Extract documentation *** Do this first! *** (Description of contents, installation instructions, etc) 1) Extract software (documentation, source code and Sun4 programs to manipulate data) 2) Extract CSS tables required for some software above (wfdisc, sensor, instrument, sitechan, ...) 3) Extract (subset of) processed data (wfdisc files and waveform files in sac format) * REQUIRES CSS tables (step 2) 4) Extract (subset of) raw data (wfdisc files and waveform files in raw format) * REQUIRES CSS tables (step 2) 5) Extract everything q) Quit Your choice: q Quitting installation script user=56.610 sec, system=218.830 sec, elapsed=1:44:04.20, cpu use=4.4%, 0 swaps, 15005 minor faults, 325 major faults, 344 reads, 3654 writes, average size: 0 shared 235 unshared 235 total, max: 1568 * 2 overend%