Number of products tagged with vs (25).
EMC IRIS Earth Model Collaboration
A repository of Earth models with the aim of providing the research community with access to various Earth models, visualization tools for model preview, facilities to extract model data/metadata and access to the contributed processing software and scripts.
EARS EarthScope Automated Receiver Survey
The EarthScope Automated Receiver Survey (EARS) calculates bulk crustal properties of IRIS stations using receiver functions. Originally developed at the University of South Carolina, EARS continuously monitors for new events and stations updating the database when new candidate data are found.
EMC-Cascade.ANT.Gao-Shen.2014 3D shear-wave velocity model of the Cascades from full-wave ambient noise tomography
Cascade.ANT.Gao-Shen.2014, Gao and Shen (2014), is based on a full-wave ambient noise tomographic method and the analysis of Rayleigh waves from ~1000 stations between 1995 to 2012, including the EarthScope USArray Transportable Array and many other permanent and flexible arrays.
EMC-Cascade.ANT.Gao-Shen.2014-Supplemental Supplemental information on Earth model Cascade.ANT.Gao-Shen.2014
Cascade.ANT.Gao-Shen.2014, Gao and Shen (2014), is based on a full-wave ambient noise tomographic method and the analysis of Rayleigh waves from ~1000 stations between 1995 to 2012, including the EarthScope USArray Transportable Array and many other permanent and flexible arrays. This page contains supplemental information on this model’s resolution.
EMC-DNA13 Earth model DNA13
DNA13 model, Porritt, Allen, & Pollitz (2014), provides three independent body-wave derived estimates of the wave-speed for the continuous US. Teleseismic and ambient noise derived phase velocities are utilized in a joint inversion with the SV component body waves.
EMC-DNA13-Supplemental Supplemental information on DNA13 Earth model
DNA13 model, Porritt, Allen, & Pollitz (2014), provides three independent body-wave derived estimates of the wave-speed for the continuous US. Teleseismic and ambient noise derived phase velocities are utilized in a joint inversion with the SV component body waves. This page contains supplemental information on resolution, phase ray and phase velocity as well as uncertainties for this model.
EMC-HMSL-S06 Earth model HMSL-S06
HMSL-S06, Houser et al. (2008) , is an isotropic shear velocity model with 18 layers (approximately 100 km thickness in the upper mantle and 200 km in the lower mantle) and 2578 blocks in each layer (approximately 4 degree equal area blocks at the equator).
EMC-NA04 North American upper mantle surface wave tomography model
NA04, van der Lee and Frederiksen (2005) , is derived from inversion of the fundamental and higher mode Rayleigh waveforms using the Partitioned Waveform Inversion technique, Nolet (1990). The data set used includes waveforms from about 1400 regional seismograms recorded at North American digital broadband seismic stations (including the USArray Transportable Array waveforms). The NA04 3-D model is expressed as the velocity difference in m/s relative to the 1-D averaged Earth model MC35 .
EMC-NA07 North American upper mantle surface wave tomography model
NA07, Bedle and van der Lee (2009) , is based on the 3-D shear velocity model NA04 and the analysis of regional S and Rayleigh waveforms for earthquakes around North America from January 2000 through September 2006, including waveforms from the USArray Transportable Array stations. The NA07 3-D model is expressed as velocity difference in m/s relative to the 1-D averaged Earth model MC35.
EMC-NWUS11-S A 3-D S-wave tomography model for the northwestern United States
A 3-D S-wave tomography model for the northwestern United States, James et al. (2011) . The S-wave inversion is based on a total of 88,689 rays from 379 teleseismic events, with typical bandpass filter ranges of 0.04-0.15 Hz. The percent velocity perturbations reported by this model are insensitive to the starting 1-D reference model.
EMC-PNW10-S S-velocity model of the Cascadia Subduction Zone
PNW10-S, Porritt et al. (2011) , PNW10-S combines the state of the art ambient noise tomography method with time tested analyst selection to ensure the highest quality data is used as input to the model inversion. Incorporating spatially and temporally long paths with this manual selection step allows recoverable structure from the surface to ~120km depth. This model focuses on the US Pacific Northwest to address a series of questions relating to variations in arc volcanism, seismicity, tremor activity, and the relation to subduction complex structure.
EMC-S2.9EA A global model with higher resolution in the upper mantle beneath Eurasia
S2.9EA, Kustowski, Ekstrom and Dziewonski (2008A) , laterally parametrize the upper-mantle structure beneath Eurasia using spherical splines with ˜2.9° spacing in Eurasia and ˜11.5° spacing elsewhere. The model is obtained from a combined data set of surface wave phase velocities, long-period waveforms and body-wave traveltimes. The 1-D reference model is STW105 .
EMC-S362ANI A global model of shear-wave velocity
S362ANI, Kustowski, Ekstrom and Dziewonski (2008) , has its radial anisotropy confined to the uppermost mantle (that is, since the anisotropy is parameterized with only the four uppermost splines, it becomes very small below a depth of 250 km, and vanishes at 410 km). The 1-D reference model is “STW105”../../referencemodels/emc-stw05 .
EMC-SAW24B16 A global shear velocity structure of the mantle from body, surface and higher-mode waveforms
A 3-D shear velocity structure of mantle based on the inversion of body, surface, and higher mode waveforms, Megnin and Romanowicz (2000) . The model was derived from handpicked transverse component waveforms and is parameterized laterally in spherical harmonics up to degree 24 (Edmonds normalization) and radially in 16 unevenly spaced splines. The SAW24B16 model is expressed as the percent perturbation from PREM .
EMC-SAW642AN A global radially anisotropic mantle shear velocity model
SAW642AN, Panning and Romanowicz (2006) , is a radially anisotropic shear velocity model, parameterized in terms of isotropic S velocity (Voigt average) and the anisotropic parameter, xi (VSH2/VSV2). Model values are percent perturbation relative to the anisotropic reference model PREM500 .
EMC-SAW642ANb A global radially anisotropic mantle shear velocity model with improved crustal corrections
SAW642ANb, Panning, Lekic and Romanowicz (2010) , is a radially anisotropic shear velocity model of the mantel, parameterized in terms of isotropic S velocity (Voigt average) and the anisotropic parameter, xi (VSH2/VSV2). The waveform data used for this model consist of 3-component broad-band surface waveforms (short period corner of 80 seconds and cutoff of 60 seconds) as well as body waveforms (short period corner of 40 s and cutoff of 32 s). The spatial parameterization of the model is the same as SAW642AN , with 16 variably spaced cubic b-splines with depth, and level 4 spherical splines laterally. Model values are percent perturbation relative to the anisotropic reference model PREM500 .
EMC-SAWum_NA2 A high-resolution North American model of upper mantle structure
SAWum_NA2 North American regional shear velocity model is an isotropic and radially and azimuthally anisotropic Vs model for the North American upper mantle. The isotropic and radial anisotropic portion of the model is developed using long period 3-component fundamental and overtone surface waveforms in the frame work of the Non-linear normal Mode Asymptotic Coupling Theory (Li and Romanowicz, 1995;1996). A joint inversion of surface waveforms and SKS station average datasets is used in the azimuthal anisotropy inversion (Montagner et al. 2000; Romanowicz and yuan 2012).
EMC-SEMum A high-resolution global model of upper mantle structure
SEMum is a radially anisotropic shear velocity model, parametrized in terms of isotropic S velocity (Voigt average) and the anisotropic parameter, xi (V sh 2 /V sv 2 ). The Vs (xi) model is parametrized in terms of 2562 (642) spherical splines laterally, and 16 irregularly spaced cubic b-splines radially.
EMC-TX2000 A global mantle shear-wave tomography model
TX2000 (also called Grand2000) refers here to the TXBW, Grand (2002) , model to distinguish it from the TXBW Grand, van der Hilst and Widiyantoro (1997) model. The model is derived from the shear body wave travel times and aims at providing a more uniform global coverage of the mantle and more information on the upper-mantle seismic structure by using analysis of multibounce shear waves, core-reflected waves and SKS and SKKS waves that travel through the core.
EMC-TX2011 A global shear-wave tomography model
TX2011 provides shear velocity perturbations with respect to the TX2011_ref reference model with the mean from the individual layers removed. The grid is not representative of the block size used in the inversion. The model assumes the crustal thickness is given by the Mooney, Laske and Masters crustal model, Mooney et al. (1998) , and thus velocity deviations in the upper most layer are with respect to a variable crustal thickness model.
EMC-wUS-SH-2010 P and S teleseismic body-wave tomography of the western United States
Teleseismic travel-time residuals from the EarthScope Transportable Array and more than 1700 additional stations are inverted for 3-D velocity perturbations. The inversion uses frequency-dependent 3-D sensitivity kernels to map travel-time residuals, measured in multiple frequency bands, into velocity structure.