Thread: TRANSFER Issue

Hi Milton, 
Thanks! You are right. It's the station location that's been bothering me. I think the .txt suffix was attached to the file by your browser. 

Thanks again. 

Januka.
 
--
Januka Attanayake
Postdoctoral Research Associate
Laboratório de Sismologia
Complexo Interdisciplinar
Departamento de Física
Instituto Superior Técnico
Av. Rovisco Pais, 1
1049-001 Lisboa, Portugal 

University email: januka.attanayake<at>ist.utl.pt
Homepage: http://sites.google.com/site/janukaattanayake/


________________________________
From: Milton Plasencia <mpplasencia<at>gmail.com>
To: Januka Attanayake <jattanayake<at>yahoo.com>
Cc: sac-help<at>iris.washington.edu
Sent: Monday, February 17, 2014 6:25 PM
Subject: Re: [SAC-HELP] TRANSFER Issue



Hi Januka,

I see two problems, 

1) in your command the file P&Z is SAC_PZs_II_ASCN_BHZ_.txt instead SAC_PZs_II_ASCN_BHZ_

2) In your SAC_PZs_II_ASCN_BHZ_.txt the location is 10 instead the file is 00 
    i modified the P&Z file changing 10 to 00.

SAC> TRANSFER FROM POLEZERO SUBTYPE SAC_PZs_II_ASCN_BHZ_.txt TO NONE FREQ 0.001 0.002 20 25
 Time of data not found in file
 Date Time: 2011/03/10 (069) 17:21:38.319

 ERROR 2114: No response information for this channel in response file. 
 Station: II.ASCN.BHZ.00
SAC> qdp off
SAC> p
SAC> sc vi SAC_PZs_II_ASCN_BHZ_.txt
SAC> sc vi SAC_PZs_II_ASCN_BHZ_.txt
SAC> TRANSFER FROM POLEZERO SUBTYPE SAC_PZs_II_ASCN_BHZ_.txt TO NONE FREQ 0.001 0.002 20 25
 Using polezero response for ASCN, BHZ, II, 00...
 Station (ASCN    ), Channel (BHZ     )
SAC> p

But, i think you must review the filter (long period)


HTH,

Milton


* * * * * * * * * * * * * * * * * * * * * * *
Milton P. PLASENCIA LINARES

Centro di Ricerche Sismologiche (CRS)
OGS - Istituto Nazionale di Oceanografia 
           e di Geofisica Sperimentale 

Borgo Grotta Gigante 42/C
(34010) Sgonico - Trieste - Italia
Tel: +39 040 2140 141 (Udine)
Tel: +39 040 2140 256 (Trieste)
Cel.: +39 331 6481 935
Fax: +39-040-327307

E-mail: mplasencia<at>inogs.it

ASAIN (Antarctic Seismographic Argentinean Italian Network)
*********************************










On Feb 17, 2014, at 6:58 PM, Januka Attanayake <jattanayake<at>yahoo.com> wrote:

Hello, 

I have trouble using the TRANSFER function with the  networks II and IU. Other networks I have works fine. I have an example .SAC and polezeros file here if anyone would like to check this issue out.
http://tiny.cc/57sfbx


For example, when I run the following commands,


SAC> r 2011.069.17.21.38.3195.II.ASCN.00.BHZ.Q.SAC



SAC> TRANSFER FROM POLEZERO SUBTYPE SAC_PZs_II_ASCN_BHZ_ TO NONE FREQ 0.001 0.002 20 25



I get the error

Time of data not found in file
Date Time: 2011/03/10 (069) 17:21:38.319


ERROR 2114: No response information for this channel in response file. 
Station: II.ASCN.BHZ.00


Many Thanks!


J.




--
Januka Attanayake
Postdoctoral Research Associate
Laboratório de Sismologia
Complexo Interdisciplinar
Departamento de Física
Instituto Superior Técnico
Av. Rovisco Pais, 1
1049-001 Lisboa, Portugal 

University email: januka.attanayake<at>ist.utl.pt
Homepage: http://sites.google.com/site/janukaattanayake/_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help