I have tried many times sonogram and spectrogram functions in SAC_Linux ver(00.59.44), but unfortunately I have gotten massages below then SAC has crashed.
========================================SAC> read test_123456.sac
SAC> sonogram
Window size: 200 Overlap: 100 FFT size: 512
Warning: ORDER begin reset to 1/2 length of correlation window.
ORDER = 100
Spectrogram dimensions are 512 by 343 .
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 72 (X_PutImage)
Serial number of failed request: 66
Current serial number in output stream: 68
=======================================
Could any one advise me or help me to solve this serious problem, please?!
Hot regards,
==================
| Omar H. Afif |
| P.O. Box: 5302 |
| Dhahran: 31311 |
| Saudi Arabia |
| Mobile: +966 5 546 08578 |
==================
========================================SAC> read test_123456.sac
SAC> sonogram
Window size: 200 Overlap: 100 FFT size: 512
Warning: ORDER begin reset to 1/2 length of correlation window.
ORDER = 100
Spectrogram dimensions are 512 by 343 .
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 72 (X_PutImage)
Serial number of failed request: 66
Current serial number in output stream: 68
=======================================
Could any one advise me or help me to solve this serious problem, please?!
Hot regards,
==================
| Omar H. Afif |
| P.O. Box: 5302 |
| Dhahran: 31311 |
| Saudi Arabia |
| Mobile: +966 5 546 08578 |
==================
-
Dear List -
I suspect this is due to the lack of TrueColor support in the X
support in SAC2000. If correct, you'll get the same result any time
you use color -- is this true? Experiment and see.
You can avoid triggering the color problem by plotting in black and
white using 'spectrogram gray' or 'spectrogram xyz' and then contouring
the resulting xyz file.
You might be able to configure your X server not to provide a
TrueColor screen choice. This is a black art, not for novices, but you
might have some success by that route. (I can provide no advice -- X
installations vary widely, and you'll have to consult your own
distribution manuals.)
If you have access to a Mac, you could also use MacSAC which has
TrueColor support and which also has a functioning spectrogram command.
On 15 Sep 2009, at 07:40, Omar Afif wrote:
I have tried many times sonogram and spectrogram functions in
George Helffrich
SAC_Linux ver(00.59.44), but unfortunately I have gotten massages
below then SAC has crashed.
========================================
SAC> read test_123456.sac
SAC> sonogram
Window size: 200 Overlap: 100 FFT size: 512
Warning: ORDER begin reset to 1/2 length of correlation window.
ORDER = 100
Spectrogram dimensions are 512 by 343 .
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 72 (X_PutImage)
Serial number of failed request: 66
Current serial number in output stream: 68
=======================================
Could any one advise me or help me to solve this serious problem,
please?!
Hot regards,
==================
| Omar H. Afif |
| P.O. Box: 5302 |
| Dhahran: 31311 |
| Saudi Arabia |
| Mobile: +966 5 546 08578 |
==================
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
george<at>geology.bristol.ac.uk
-
Along the lines that George suggested. Upgrading to a newer version
of sac should solve your issue. The problem you are experiencing was
fixed in SAC version 100.1 in 2005 ( 101.0 in 2007 ). Using either
SAC distributed by IRIS or MacSac should solve your problems.
Brian Savage
savage<at>uri.edu
On Sep 15, 2009, at 3:21 AM , George Helffrich wrote:
Dear List -
I suspect this is due to the lack of TrueColor support in the X
support in SAC2000. If correct, you'll get the same result any time
you use color -- is this true? Experiment and see.
You can avoid triggering the color problem by plotting in black and
white using 'spectrogram gray' or 'spectrogram xyz' and then
contouring the resulting xyz file.
You might be able to configure your X server not to provide a
TrueColor screen choice. This is a black art, not for novices, but
you might have some success by that route. (I can provide no advice
-- X installations vary widely, and you'll have to consult your own
distribution manuals.)
If you have access to a Mac, you could also use MacSAC which has
TrueColor support and which also has a functioning spectrogram
command.
On 15 Sep 2009, at 07:40, Omar Afif wrote:
I have tried many times sonogram and spectrogram functions in
George Helffrich
SAC_Linux ver(00.59.44), but unfortunately I have gotten massages
below then SAC has crashed.
========================================
SAC> read test_123456.sac
SAC> sonogram
Window size: 200 Overlap: 100 FFT size: 512
Warning: ORDER begin reset to 1/2 length of correlation window.
ORDER = 100
Spectrogram dimensions are 512 by 343 .
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 72 (X_PutImage)
Serial number of failed request: 66
Current serial number in output stream: 68
=======================================
Could any one advise me or help me to solve this serious problem,
please?!
Hot regards,
==================
| Omar H. Afif |
| P.O. Box: 5302 |
| Dhahran: 31311 |
| Saudi Arabia |
| Mobile: +966 5 546 08578 |
==================
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
george<at>geology.bristol.ac.uk
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
-