Thread: Discussion of dataless digitizer

Started: 2019-03-20 02:35:41
Last activity: 2019-03-27 17:18:52
Topics: PDCC
Fajar Ardianto
Discussion of dataless digitizer
2019-03-20 02:35:41
I have a digitizer instrument that is not registered in pdcc, and I want to open data from the instrument using seiscomp3. Because the dataless of the digitizer must be needed, then I have to make it myself. Can anyone help me how to create my own dataless ?

Thankyou
  • Mary Templeton
    Re: Discussion of dataless digitizer
    2019-03-20 15:23:33
    Good morning Fajar,

    What manufacturer and model is your datalogger? Creating a dataless
    SEED response for a datalogger requires the following information from the
    manufacturer:

    1) preamp gain setting
    2) ADC scale factor (or bit weight)
    3) the initial sample rate out of the ADC
    4) the order and decimation factor of each FIR filter used to attain your sample rate
    5) the coefficients of each FIR filter used
    6) information about any additional stages that affect the response of the datalogger (e.g. special filters)

    How much of this information do you have for your datalogger?

    Best regards,
    Mary Templeton

    On Mar 19, 2019, at 8:36 PM, Fajar Ardianto <fajarwahyu12<at>gmail.com> wrote:

    I have a digitizer instrument that is not registered in pdcc, and I want to open data from the instrument using seiscomp3. Because the dataless of the digitizer must be needed, then I have to make it myself. Can anyone help me how to create my own dataless ?

    Thankyou

    ----------------------
    PDCC
    Topic home: http://ds.iris.edu/message-center/topic/pdcc/ | Unsubscribe: pdcc-unsubscribe<at>lists.ds.iris.edu

    Sent from the IRIS Message Center (http://ds.iris.edu/message-center/)
    Update subscription preferences at http://ds.iris.edu/account/profile/


    • Fajar Ardianto
      Re: Discussion of dataless digitizer
      2019-03-27 05:07:56
      Dear Mary,

      I use GMSPlus6 from Geosig. Maybe I can find the data information from my logger. then after I can get information from my logger, what next step should I do? can you tell me the steps?
      thank you

      Best Regards,
      Fajar
    • Fajar Ardianto
      Re: Discussion of dataless digitizer
      2019-03-27 05:12:27
      Dear Mary,

      I use GMSPlus6 from Geosig. maybe I can get information from my logger that you mentioned. then after I know the information from my loggor, what steps should I do next? can you guide me, I will be very grateful if you can help me
      thank you

      Best Regards,
      Fajar
      • Mary Templeton
        Re: Discussion of dataless digitizer
        2019-03-27 17:18:52
        Hi Fajar,

        I’m happy to help. Let me know what you receive from your datalogger - with
        luck, we may be able to use it directly, depending on the format.

        cheers,
        Mary

        On Mar 26, 2019, at 11:12 PM, Fajar Ardianto <fajarwahyu12<at>gmail.com> wrote:

        Dear Mary,

        I use GMSPlus6 from Geosig. maybe I can get information from my logger that you mentioned. then after I know the information from my loggor, what steps should I do next? can you guide me, I will be very grateful if you can help me
        thank you

        Best Regards,
        Fajar

        ----------------------
        PDCC
        Topic home: http://ds.iris.edu/message-center/topic/pdcc/ | Unsubscribe: pdcc-unsubscribe<at>lists.ds.iris.edu

        Sent from the IRIS Message Center (http://ds.iris.edu/message-center/)
        Update subscription preferences at http://ds.iris.edu/account/profile/


NSF SAGE Facility has been certified as a trustworthy data repository by the CoreTrustSeal Standards and Certification Board
12:32:05 v.b4412d20