Hi all!
I'm having problems right after the installation. I received a tarball
"sac-101.3b.tar.gz" and followed the instructions in the email as well
as those listed in $SACHOME/README
Problem: SAC isn't executing despite following the installation
instructions carefully.
System information:
System:
"uname -ris": Linux 2.6.18-164.9.1.el5 x86_64
I'm running RedHat Linux 5.4 (CentOS 5.4)
SAC Location:
"echo $SACHOME": /usr/local/bin
Settings & ~/.bashrc:
export SACHOME=/usr/local/sac
export PATH=${PATH}:${SACHOME}/bin
export SACAUX=${SACHOME}/aux
export SAC_USE_DATABASE=0
export SAC_PPK_LARGE_CROSSHAIRS=0
When calling "./sac", this error is output:
"
/aux/csspickpref . readcss will not read picks.
ERROR: Number 901 in INITCOMLISTS.
/aux/clstdpening Command List: /usr/local/sac
"
This seem awefully similar to the problem reported in this thread:
http://www.iris.washington.edu/pipermail/sac-help/2006-November/000188.html
for which no solution was found and only a newer version helped.
I have no clue what is going wrong. Any suggestions?
Thanks in advance,
Ole
I'm having problems right after the installation. I received a tarball
"sac-101.3b.tar.gz" and followed the instructions in the email as well
as those listed in $SACHOME/README
Problem: SAC isn't executing despite following the installation
instructions carefully.
System information:
System:
"uname -ris": Linux 2.6.18-164.9.1.el5 x86_64
I'm running RedHat Linux 5.4 (CentOS 5.4)
SAC Location:
"echo $SACHOME": /usr/local/bin
Settings & ~/.bashrc:
export SACHOME=/usr/local/sac
export PATH=${PATH}:${SACHOME}/bin
export SACAUX=${SACHOME}/aux
export SAC_USE_DATABASE=0
export SAC_PPK_LARGE_CROSSHAIRS=0
When calling "./sac", this error is output:
"
/aux/csspickpref . readcss will not read picks.
ERROR: Number 901 in INITCOMLISTS.
/aux/clstdpening Command List: /usr/local/sac
"
This seem awefully similar to the problem reported in this thread:
http://www.iris.washington.edu/pipermail/sac-help/2006-November/000188.html
for which no solution was found and only a newer version helped.
I have no clue what is going wrong. Any suggestions?
Thanks in advance,
Ole
-
Hi everyone,
I see the same Error when trying to run a script with cron that calls
sac. Starting the same script from a shell works fine, though. I've made
sure that the environment for the cron-job is the same as for a normal
login-shell. Has anyone had this problem before?
Cheers,
Yannik
J. Ole Kaven wrote:
Hi all!
--
I'm having problems right after the installation. I received a tarball
"sac-101.3b.tar.gz" and followed the instructions in the email as well
as those listed in $SACHOME/README
Problem: SAC isn't executing despite following the installation
instructions carefully.
System information:
System:
"uname -ris": Linux 2.6.18-164.9.1.el5 x86_64
I'm running RedHat Linux 5.4 (CentOS 5.4)
SAC Location:
"echo $SACHOME": /usr/local/bin
Settings & ~/.bashrc:
export SACHOME=/usr/local/sac
export PATH=${PATH}:${SACHOME}/bin
export SACAUX=${SACHOME}/aux
export SAC_USE_DATABASE=0
export SAC_PPK_LARGE_CROSSHAIRS=0
When calling "./sac", this error is output:
"
/aux/csspickpref . readcss will not read picks.
ERROR: Number 901 in INITCOMLISTS.
/aux/clstdpening Command List: /usr/local/sac
"
This seem awefully similar to the problem reported in this thread:
http://www.iris.washington.edu/pipermail/sac-help/2006-November/000188.html
for which no solution was found and only a newer version helped.
I have no clue what is going wrong. Any suggestions?
Thanks in advance,
Ole
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
Yannik Behr
PhD Student in Seismology
School of Geography, Environment, and Earth Sciences
Victoria University of Wellington
P.O. Box 600
Wellington 6015
New Zealand
yannik.behr<at>vuw.ac.nz
ph. +64 (4) 463 5233 8369
fax.+64 (4) 463 5186
-
Just realized that I set an environment variable to a wrong value. Sorry
for the spam.
Yannik
Yannik Behr wrote:
Hi everyone,
--
I see the same Error when trying to run a script with cron that calls
sac. Starting the same script from a shell works fine, though. I've made
sure that the environment for the cron-job is the same as for a normal
login-shell. Has anyone had this problem before?
Cheers,
Yannik
J. Ole Kaven wrote:
Hi all!
I'm having problems right after the installation. I received a tarball
"sac-101.3b.tar.gz" and followed the instructions in the email as well
as those listed in $SACHOME/README
Problem: SAC isn't executing despite following the installation
instructions carefully.
System information:
System:
"uname -ris": Linux 2.6.18-164.9.1.el5 x86_64
I'm running RedHat Linux 5.4 (CentOS 5.4)
SAC Location:
"echo $SACHOME": /usr/local/bin
Settings & ~/.bashrc:
export SACHOME=/usr/local/sac
export PATH=${PATH}:${SACHOME}/bin
export SACAUX=${SACHOME}/aux
export SAC_USE_DATABASE=0
export SAC_PPK_LARGE_CROSSHAIRS=0
When calling "./sac", this error is output:
"
/aux/csspickpref . readcss will not read picks.
ERROR: Number 901 in INITCOMLISTS.
/aux/clstdpening Command List: /usr/local/sac
"
This seem awefully similar to the problem reported in this thread:
http://www.iris.washington.edu/pipermail/sac-help/2006-November/000188.html
for which no solution was found and only a newer version helped.
I have no clue what is going wrong. Any suggestions?
Thanks in advance,
Ole
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
Yannik Behr
PhD Student in Seismology
School of Geography, Environment, and Earth Sciences
Victoria University of Wellington
P.O. Box 600
Wellington 6015
New Zealand
yannik.behr<at>vuw.ac.nz
ph. +64 (4) 463 5233 8369
fax.+64 (4) 463 5186
-