Thread: Fwd: Re: Fwd: printed comment in transfer command

Started: 2011-07-25 15:31:54
Last activity: 2011-07-25 15:31:54
Topics: SAC Help
Sheila Peacock
2011-07-25 15:31:54
Dear Arthur and All,

I got this from my colleague who has been using SAC for a
long time.

Sheila Peacock.

-------- Original Message --------
Subject: Re: Fwd: [SAC-HELP] printed comment in transfer command
Date: Mon, 25 Jul 2011 08:27:30 +0100


Sheila,

this has probably been answered already.

The value is not always "1.0000". On older versions of SAC, if you apply
"transfer" to multiple waveforms simultaneously, then all but the first
waveform are multiplied by the "scale" value in the sac header. I always
assumed this was a bug or half-implemented feature so I always tried to
avoid it!


Sheila Peacock wrote:


-------- Original Message --------
Subject: [SAC-HELP] printed comment in transfer command
Date: Wed, 6 Jul 2011 19:34:49 -0400 (EDT)
From: Arthur Snoke <snoke<at>vt.edu>
To: SAC-help Listserv <sac-help<at>iris.washington.edu>

For all transfer commands, there is a line printed to the screen:

Waveform multiplied by 1.000000 after deconvolution.

So far as I can tell it, this line serves no purpose. If any of you know
a reason to keep this printed output, please let me know.
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
.



11:22:10 v.01697673