Thread: khole in sac

Hi Sunil,
00 and 10 etc represents the Location code, in this case
represents different instruments en the same place (Station PALK),
i see in the IRIS II network and the 00 (BH?)correspond to the Borehole
instrument Geotech KS-54000, and Location 10 (BH?) correspond to GMG-3T
Guralp instrument, see here: http://www.iris.edu/dms/mda.htm and
search for II Network and then for PALK station.

HTH,

Milton


**********************************
Milton P. PLASENCIA LINARES

Dipartimento Centro di Ricerche Sismologiche
Istituto Nazionale di Oceanografia e di Geofisica Sperimentale - OGS

Borgo Grotta Gigante 42/C
(34010) Sgonico - TRIESTE - ITALIA
Tel: +39-040-2140136
Fax: +39-040-327307

E-mail: mplasencia<at>ogs.trieste.it

ASAIN (Antarctic Seismographic Argentinean Italian Network)
*********************************


Quoting "Sunil Roy" <seismo_003<at>rediffmail.com>:

Dear Sac Users,

I have download data form IRIS, which is in seed format.
Late I have converted it to sac format. I found that for some
event two sac files are present with different file name as:

2011.365.00.39.00.0195.II.PALK.00.BHZ.M.SAC
2011.365.00.39.00.0195.II.PALK.10.BHZ.M.SAC

After closely looking at the header I found that they have
different value in khole. So in the file name 00 and 10 represents
khole value. If it is khole then what it represents. Which file should
I take for my analysis. If not then why this two files are different.




with regards
Sunil

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.