A forum for SAC users to exchange ideas and ask questions about SAC usage, installation, portability, etc.
- Email address
- sac-help@lists.ds.iris.edu
- Type
-
Help
Help lists are for submitting support questions. Anyone can post a question for IRIS (or another team) to answer.
- Moderated by
- IRIS Webmaster
- Related tags
- SAC Software SAC
Active Message Threads for December 2013
Hamdi ALKAN
My pc system is ubuntu 13.10 32 bit. I tried "./src/sac" but i take error,
ERROR:"Environmental variable SACAUX not defined".
when i run ./configure, take compilation options at the below, and when i
run "make check", it appears that graphics window on my screan.
Compilation Options for sac (Seismic Analysis Code 101.6a)
CFLAGS = -D_GNU_SOURCE
LDFLAGS =
LIBS = -ldl -lm -lncurses
Debug =
Optimization =
Database = off
Matlab = off
X11-buffer …
[more]
No replies
I'm Hamdi ALKAN and post graduate student from Karadeniz Technical
University, Trabzon, TURKEY. I study to compile sac-101.6a. As the
following, i sent error message.
I have waited for the support.
Sincerely...
Thanks for your interest...
Test: zprocessline
Test: zzzzcd
Errors: 1945
FAIL: pytest.sh
=============================================
1 of 5 tests failed
Please report to sac-help@iris.washington.edu
=============================================
make[1]: *** [check-TESTS] Error 1…
[more]
Replies
-
Re: SAC - Brian Savage - 2013-12-30 19:14:27
siti latifah via LinkedIn
Hi Sac Help,
I'd like to connect with you on LinkedIn.
siti latifah
Attended Universitas Gadjah Mada (UGM)
Accept: http://www.linkedin.com/%2Fblink?simpleRedirect=7tfr6plcTxqfnBBiShBsC5EsOoOcPoOcjAQdPgTcjR4imVLqnhxt6BSrCACe39vsClyrmlJnSlQqnpKqjRHpipBt6BSrCBTpmUJt71BoSdxbm8JrnpKqlZJrmZzbmNJpjRDrCBHoS5Ot2pBt6BSrABOpm9JpmQZoipNciQRcT4OtSNMq2QTsSpHcz8ZpjYOtyZBbSRLoOVKqmhBqSVFr2VTtTsLbPFMt7hE&msgID=I518458275_125&markAsRead=
View siti latifah's profile: http://www.linkedin.com/%2Fblink?simpleRedi…
[more]
No replies
firdaus
dear All,
i'm currently installing SAC-101.4.tar.gz in LINUX operating system. After
execute it with "make install" command, i found many errors during
installation, for instance
../inc/gd3.x11.h:102: error: expected '=', ',', ';', 'asm' or
'__attribute__' before '*' token
../inc/gd3.x11.h:103: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'pixdef3'
../inc/gd3.x11.h:108: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'plotw3_pixmap'
etc
anyone could help me h…
[more]
Replies
-
Re: errors during SAC's installation - Brian Savage - 2013-12-18 17:40:18
-
Re: errors during SAC's installation - firdaus - 2013-12-20 04:46:19
-
Re: errors during SAC's installation - Milton Plasencia - 2013-12-19 23:15:07
-
Re: errors during SAC's installation - firdaus - 2013-12-20 05:25:59
-
-
-
Hello ,
I am using SAC (Version 101.6). For some reason the rh command used inside
a macro with Blackbord variables cannot be used.
* Read files to determine component orientations
rh %files%
==> rh efam.syn.r efam.syn.t efam.syn.z
ERROR 1301: No data files read in.
ERROR 1016: Terminating execution of macro mtrf
Command line is: rh %files%
All these files are present in the folder. Is the version of sac broken.
What is the possible solution?
Replies
-
Re: Sac version 101.6 broken - Arthur Snoke - 2013-12-13 15:47:05
-
Re: Sac version 101.6 broken - Tannistha Maiti - 2013-12-17 05:39:44
-
Re: Sac version 101.6 broken - Brian Savage - 2013-12-18 21:45:23
-
-
Can somebody tell me what is wrong with the code:
do file wild *BXZ.sac
setbb vert $file
setbb east'(CHANGE 'BXZ.sac' 'BXE.sac' %vert )'
setbb north '( CHANGE 'BXZ.sac' 'BXN.sac' %vert )'
r %vert %east %north
ERROR interpreting command: setbb east'(CHANGE 'BXZ.sac' 'BXE.sac' %vert
)'
NEED A BLACKBOARD
VALUE ^
ERROR 1016: Terminating execution of macro
Replies
-
Re: setbb - Januka Attanayake - 2013-12-17 09:54:28
dear All
i've just started my research regarding seismic microzonation that use
strong ground motion of earthquake as prime subject to be analyzed in term
of signal processing. I've found a thousands data in IRIS website
http://www.iris.edu/wilber3/find_event which is freely downloadable in some
extension files (ie. *.sac, *.smc, *.seed, *.ascii, etc).
My question is, how to convert those files into time domain, hence it can
be analyzed much easier for beginner user.
I've been trying downlo…
[more]
No replies
LinkedIn
------------
Mohit Agrawal has indicated you are a Friend
------------------------------------------
Since you are a person I trust, I wanted to invite you to join my network on LinkedIn.
Accept invitation from Mohit Agrawal
http://www.linkedin.com/e/-9ou29g-hp5sa23g-1w/ubIx8rFs5oSdYQa2oQHQ-lofPc2q7sw6cHvfFlhxuru/blk/I513982418_125/e39SrCAJoS5vrCAJoyRJtCVFnSRJrScJr6RBfnhv9ClRsDgZp6lQs6lzoQ5AomZIpn8_dj8NnPwNd38UejcNdkALe7B…
[more]
No replies
Tannistha Maiti
2013-12-03 22:49:12
- 2013-12-04 08:11:13
Hi,
I would like to know where do I get RSACH and WSACH . Its not referred to
libsac.a.
Please help.
Thanks,
Tannistha
Replies
-
Re: sac library RSACH(file,nerr) WSACH(file,nerr) - George Helffrich - 2013-12-04 08:11:13
