I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. the easy way is uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically install another program called "sac" and it is a Login accounting. Just uninstall it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
Dear all,
I've installed sac-101.6a-linux_x86_64 into my Ubuntu
and put it to /usr/bin/sac. I've done everything but
everytime I tried to run my sac, it always appeared like this :
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
I know, my sac is already been installed because there is
no "command not found" in the terminal. But it still won't work.Could anyone help me to solve it ?
Thanks so much for your helpMASSITA AYU CINDY, STHIMA TG "TERRA" ITB | SEG SC ITB
Master Program of Geophysical EngineeringInstitut Teknologi Bandung, Indonesia
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
install another program called "sac" and it is a Login accounting. the easy way is uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically install another program called "sac" and it is a Login accounting. Just uninstall it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
Dear all,
I've installed sac-101.6a-linux_x86_64 into my Ubuntu
and put it to /usr/bin/sac. I've done everything but
everytime I tried to run my sac, it always appeared like this :
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
I know, my sac is already been installed because there is
no "command not found" in the terminal. But it still won't work.Could anyone help me to solve it ?
Thanks so much for your helpMASSITA AYU CINDY, STHIMA TG "TERRA" ITB | SEG SC ITB
Master Program of Geophysical EngineeringInstitut Teknologi Bandung, Indonesia
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
-
Dear Colleagues,
I think the problem with *SACINIT* script. Edit the shell script to point
the installation directory to /usr/bin/sac. SACAUX also has to be set to
the directory of your installation.
Best regards
=========================================
Amin Esmail Khalil, Assoc. Prof
Geology Dept., Faculty of Science
Helwan Univ., Cairo, Egypt
tel: home: +202 33750515
mobile: +20100 66 209 26
========================================
2015-04-20 21:54 GMT+08:00 Rocio Parillo <searchrocio<at>hotmail.com>:
I had the same problem, when you install ubuntu you automatically install
another program called "sac" and it is a Login accounting. the easy way is
uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
------------------------------
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically install
another program called "sac" and it is a Login accounting. Just uninstall
it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
------------------------------
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
*Dear all,I've installed sac-101.6a-linux_x86_64 into my Ubuntu and put it to /usr/bin/sac. I've done everything but everytime I tried to run my sac, it always appeared like this :*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
*I know, my sac is already been installed because there is no "command not found" in the terminal. But it still won't work.*
*Could anyone help me to solve it ?
Thanks so much for your help*
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
_______________________________________________ sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
-
*I've uninstalled "the another sac program" and also edit the sacinit.sh
and sacaux script. it's no longer shows *
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days
*But I got another problem when I try to run my sac, it appeared like this*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
bash: /usr/local/sac/bin/sac: cannot execute binary file: Exec format error
*Well, I think I've done all the necessary steps and I have no idea
what i miss this time. Can anyone help me again?? *
*Thank you so much for your time. *
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Mon, Apr 20, 2015 at 9:06 PM, amin khalil <aminwej<at>gmail.com> wrote:
Dear Colleagues,
I think the problem with *SACINIT* script. Edit the shell script to point
the installation directory to /usr/bin/sac. SACAUX also has to be set to
the directory of your installation.
Best regards
=========================================
Amin Esmail Khalil, Assoc. Prof
Geology Dept., Faculty of Science
Helwan Univ., Cairo, Egypt
tel: home: +202 33750515
mobile: +20100 66 209 26
========================================
2015-04-20 21:54 GMT+08:00 Rocio Parillo <searchrocio<at>hotmail.com>:
I had the same problem, when you install ubuntu you automatically install
another program called "sac" and it is a Login accounting. the easy way is
uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
------------------------------
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically install
another program called "sac" and it is a Login accounting. Just uninstall
it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
------------------------------
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
*Dear all,I've installed sac-101.6a-linux_x86_64 into my Ubuntu and put it to /usr/bin/sac. I've done everything but everytime I tried to run my sac, it always appeared like this :*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
*I know, my sac is already been installed because there is no "command not found" in the terminal. But it still won't work.*
*Could anyone help me to solve it ?
Thanks so much for your help*
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
_______________________________________________ sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
-
after installation done correctly then next step is path setting in bash
export SACHOME=/usr/local/sac (Your sac path location)
export SACAUX=$SACHOME/aux
export PATH=$SACHOME/bin:$PATH
then if you have other package have same name "SAC"
TRY TO locate it by terminal "which sac" and rename as "sac_old"
try again with new terminal to run sac again.
hope it work...
1.
On Tue, Apr 21, 2015 at 8:17 AM, massita cindy <massitacindy<at>gmail.com>
wrote:
*I've uninstalled "the another sac program" and also edit the sacinit.sh
--
and sacaux script. it's no longer shows *
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days
*But I got another problem when I try to run my sac, it appeared like this*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
bash: /usr/local/sac/bin/sac: cannot execute binary file: Exec format error
*Well, I think I've done all the necessary steps and I have no idea what i miss this time. Can anyone help me again?? *
*Thank you so much for your time. *
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Mon, Apr 20, 2015 at 9:06 PM, amin khalil <aminwej<at>gmail.com> wrote:
Dear Colleagues,
_______________________________________________
I think the problem with *SACINIT* script. Edit the shell script to
point the installation directory to /usr/bin/sac. SACAUX also has to be
set to the directory of your installation.
Best regards
=========================================
Amin Esmail Khalil, Assoc. Prof
Geology Dept., Faculty of Science
Helwan Univ., Cairo, Egypt
tel: home: +202 33750515
mobile: +20100 66 209 26
========================================
2015-04-20 21:54 GMT+08:00 Rocio Parillo <searchrocio<at>hotmail.com>:
I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. the easy
way is uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
------------------------------
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. Just
uninstall it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
------------------------------
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
*Dear all,I've installed sac-101.6a-linux_x86_64 into my Ubuntu and put it to /usr/bin/sac. I've done everything but everytime I tried to run my sac, it always appeared like this :*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
*I know, my sac is already been installed because there is no "command not found" in the terminal. But it still won't work.*
*Could anyone help me to solve it ?
Thanks so much for your help*
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
_______________________________________________ sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Satish Maurya*
* Ph.D. studentDept. of Seismology*
*IPGP, France*
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
I've done it either with gedit bashrc, but it still won't work. Is there
another suggestion :( ??
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Tue, Apr 21, 2015 at 1:37 PM, satish maurya <maurya2278satish<at>gmail.com>
wrote:
after installation done correctly then next step is path setting in bash
export SACHOME=/usr/local/sac (Your sac path location)
export SACAUX=$SACHOME/aux
export PATH=$SACHOME/bin:$PATH
then if you have other package have same name "SAC"
TRY TO locate it by terminal "which sac" and rename as "sac_old"
try again with new terminal to run sac again.
hope it work...
1.
On Tue, Apr 21, 2015 at 8:17 AM, massita cindy <massitacindy<at>gmail.com>
wrote:
*I've uninstalled "the another sac program" and also edit the sacinit.sh
--
and sacaux script. it's no longer shows *
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days
*But I got another problem when I try to run my sac, it appeared like this*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
bash: /usr/local/sac/bin/sac: cannot execute binary file: Exec format error
*Well, I think I've done all the necessary steps and I have no idea what i miss this time. Can anyone help me again?? *
*Thank you so much for your time. *
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Mon, Apr 20, 2015 at 9:06 PM, amin khalil <aminwej<at>gmail.com> wrote:
Dear Colleagues,
_______________________________________________
I think the problem with *SACINIT* script. Edit the shell script to
point the installation directory to /usr/bin/sac. SACAUX also has to be
set to the directory of your installation.
Best regards
=========================================
Amin Esmail Khalil, Assoc. Prof
Geology Dept., Faculty of Science
Helwan Univ., Cairo, Egypt
tel: home: +202 33750515
mobile: +20100 66 209 26
========================================
2015-04-20 21:54 GMT+08:00 Rocio Parillo <searchrocio<at>hotmail.com>:
I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. the easy
way is uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
------------------------------
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. Just
uninstall it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
------------------------------
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
*Dear all,I've installed sac-101.6a-linux_x86_64 into my Ubuntu and put it to /usr/bin/sac. I've done everything but everytime I tried to run my sac, it always appeared like this :*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
*I know, my sac is already been installed because there is no "command not found" in the terminal. But it still won't work.*
*Could anyone help me to solve it ?
Thanks so much for your help*
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
_______________________________________________ sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Satish Maurya*
* Ph.D. studentDept. of Seismology*
*IPGP, France*
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
Check if /usr/local/sac/bin/sac have executable permissions, or
Perhaps your install sac@64 bits on 32 bits machine?
HTH,
milton
On Apr 21, 2015, at 09:25, massita cindy <massitacindy<at>gmail.com> wrote:
I've done it either with gedit bashrc, but it still won't work. Is there another suggestion :( ??
MASSITA AYU CINDY, ST
HIMA TG "TERRA" ITB | SEG SC ITB
Master Program of Geophysical Engineering
Institut Teknologi Bandung, Indonesia
On Tue, Apr 21, 2015 at 1:37 PM, satish maurya <maurya2278satish<at>gmail.com <maurya2278satish<at>gmail.com>> wrote:
after installation done correctly then next step is path setting in bash
export SACHOME=/usr/local/sac (Your sac path location)
export SACAUX=$SACHOME/aux
export PATH=$SACHOME/bin:$PATH
then if you have other package have same name "SAC"
TRY TO locate it by terminal "which sac" and rename as "sac_old"
try again with new terminal to run sac again.
hope it work...
On Tue, Apr 21, 2015 at 8:17 AM, massita cindy <massitacindy<at>gmail.com <massitacindy<at>gmail.com>> wrote:
I've uninstalled "the another sac program" and also edit the sacinit.sh and sacaux script. it's no longer shows
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days
But I got another problem when I try to run my sac, it appeared like this
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
bash: /usr/local/sac/bin/sac: cannot execute binary file: Exec format error
Well, I think I've done all the necessary steps and I have no idea what i miss this time. Can anyone help me again??
Thank you so much for your time.
MASSITA AYU CINDY, ST
HIMA TG "TERRA" ITB | SEG SC ITB
Master Program of Geophysical Engineering
Institut Teknologi Bandung, Indonesia
On Mon, Apr 20, 2015 at 9:06 PM, amin khalil <aminwej<at>gmail.com <aminwej<at>gmail.com>> wrote:
Dear Colleagues,
I think the problem with SACINIT script. Edit the shell script to point the installation directory to /usr/bin/sac. SACAUX also has to be set to the directory of your installation.
Best regards
=========================================
Amin Esmail Khalil, Assoc. Prof
Geology Dept., Faculty of Science
Helwan Univ., Cairo, Egypt
tel: home: +202 33750515 <tel:%2B202%2033750515>
mobile: +20100 66 209 26
========================================
2015-04-20 21:54 GMT+08:00 Rocio Parillo <searchrocio<at>hotmail.com <searchrocio<at>hotmail.com>>:
I had the same problem, when you install ubuntu you automatically install another program called "sac" and it is a Login accounting. the easy way is uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
From: searchrocio<at>hotmail.com <searchrocio<at>hotmail.com>
To: massitacindy<at>gmail.com <massitacindy<at>gmail.com>
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically install another program called "sac" and it is a Login accounting. Just uninstall it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com <massitacindy<at>gmail.com>
To: sac-help<at>iris.washington.edu <sac-help<at>iris.washington.edu>
Subject: [SAC-HELP] Need Help
Dear all,
I've installed sac-101.6a-linux_x86_64 into my Ubuntu
and put it to /usr/bin/sac. I've done everything but
everytime I tried to run my sac, it always appeared like this :
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
I know, my sac is already been installed because there is
no "command not found" in the terminal. But it still won't work.
Could anyone help me to solve it ?
Thanks so much for your help
MASSITA AYU CINDY, ST
HIMA TG "TERRA" ITB | SEG SC ITB
Master Program of Geophysical Engineering
Institut Teknologi Bandung, Indonesia
_______________________________________________ sac-help mailing list sac-help<at>iris.washington.edu <sac-help<at>iris.washington.edu> http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu <sac-help<at>iris.washington.edu>
http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu <sac-help<at>iris.washington.edu>
http://www.iris.washington.edu/mailman/listinfo/sac-help
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Satish Maurya
Ph.D. student
Dept. of Seismology
IPGP, France
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
-
Thank you for all of your suggestion. I just realized that my linux have 32
bit in system, and I already requested for 32 bit sac. Hoping there will be
no more problem --".
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Tue, Apr 21, 2015 at 3:10 PM, Milton Plasencia <mplasencia<at>inogs.it>
wrote:
Check if /usr/local/sac/bin/sac have executable permissions, or
Perhaps your install sac@64 bits on 32 bits machine?
HTH,
milton
On Apr 21, 2015, at 09:25, massita cindy <massitacindy<at>gmail.com> wrote:
I've done it either with gedit bashrc, but it still won't work. Is there
another suggestion :( ??
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Tue, Apr 21, 2015 at 1:37 PM, satish maurya <maurya2278satish<at>gmail.com
wrote:
_______________________________________________
after installation done correctly then next step is path setting in bash
export SACHOME=/usr/local/sac (Your sac path location)
export SACAUX=$SACHOME/aux
export PATH=$SACHOME/bin:$PATH
then if you have other package have same name "SAC"
TRY TO locate it by terminal "which sac" and rename as "sac_old"
try again with new terminal to run sac again.
hope it work...
1.
On Tue, Apr 21, 2015 at 8:17 AM, massita cindy <massitacindy<at>gmail.com>
wrote:
*I've uninstalled "the another sac program" and also edit the sacinit.sh
--
and sacaux script. it's no longer shows *
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days
*But I got another problem when I try to run my sac, it appeared like this*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
bash: /usr/local/sac/bin/sac: cannot execute binary file: Exec format error
*Well, I think I've done all the necessary steps and I have no idea what i miss this time. Can anyone help me again?? *
*Thank you so much for your time. *
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
On Mon, Apr 20, 2015 at 9:06 PM, amin khalil <aminwej<at>gmail.com> wrote:
Dear Colleagues,
_______________________________________________
I think the problem with *SACINIT* script. Edit the shell script to
point the installation directory to /usr/bin/sac. SACAUX also has to be
set to the directory of your installation.
Best regards
=========================================
Amin Esmail Khalil, Assoc. Prof
Geology Dept., Faculty of Science
Helwan Univ., Cairo, Egypt
tel: home: +202 33750515
mobile: +20100 66 209 26
========================================
2015-04-20 21:54 GMT+08:00 Rocio Parillo <searchrocio<at>hotmail.com>:
I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. the easy
way is uninstall it with the ubuntu software center.
And then your sac (Seismic Analysis code) is going to work fine.
I hope it helps you. :-)
Xio
------------------------------
From: searchrocio<at>hotmail.com
To: massitacindy<at>gmail.com
Subject: RE: [SAC-HELP] Need Help
Date: Mon, 20 Apr 2015 13:51:37 +0000
I had the same problem, when you install ubuntu you automatically
install another program called "sac" and it is a Login accounting. Just
uninstall it with the ubuntu software center.
And then your sac is going to work fine.
Greets
Xio
------------------------------
Date: Mon, 20 Apr 2015 18:06:12 +0700
From: massitacindy<at>gmail.com
To: sac-help<at>iris.washington.edu
Subject: [SAC-HELP] Need Help
*Dear all,I've installed sac-101.6a-linux_x86_64 into my Ubuntu and put it to /usr/bin/sac. I've done everything but everytime I tried to run my sac, it always appeared like this :*
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.84 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 21.85 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.00 over 7 days.
massita@massita-Lenovo-Ideapad-Flex-14:~$ sac
Total: 22.01 over 7 days.
*I know, my sac is already been installed because there is no "command not found" in the terminal. But it still won't work.*
*Could anyone help me to solve it ?
Thanks so much for your help*
*MASSITA AYU CINDY, ST*
*HIMA TG "TERRA" ITB | SEG SC ITB*
*Master Program of Geophysical Engineering*
*Institut Teknologi Bandung, Indonesia*
_______________________________________________ sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
_______________________________________________
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Satish Maurya*
* Ph.D. studentDept. of Seismology*
*IPGP, France*
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sac-help mailing list
sac-help<at>iris.washington.edu
http://www.iris.washington.edu/mailman/listinfo/sac-help
-
-
-
-
-