Thread: URL Builder noise-psd v.1

The psd-noise URL Builder Response Correction is now a Yes/No drop-down box. This should fix the issue.

-Gillian

On Aug 14, 2017, at 12:24 PM, Gillian Sharer <gillian<at>iris.washington.edu> wrote:

Hi Noel,

Mary is right that if “correct” is not specified the service defaults to true, but I agree that the URL Builder has a fault. If the Response Correction box is unchecked than the link should add “correct=false”. We’ll look into getting the behavior changed.

cheers,
Gillian

On Aug 14, 2017, at 12:20 PM, Mary Templeton <met<at>iris.washington.edu> wrote:

Hi Noel,

The default for “correct” is “true", so I _would_ expect the two plots to look the
same. If I use correct=false, I get a different plot (it looks like the curves go away,
but that’s because the Y axis needs rescaling).

cheers,
Mary

On Aug 14, 2017, at 12:27 PM, Noel Barstow <barstow<at>passcal.nmt.edu> wrote:

Hi folks,
I get the same result using URL Builder noise-psd v.1
with the
Output -> Response Correction
checked OR unchecked.
Is that what is intended?
Thank you,
Noel

an example net sta loc chan snapshot below (Response Correction NOT checked)
<Unsaved Preview Document.png>
The resulting links (below) differ (as expected), but the plots are identical:

http://service.iris.edu/mustang/noise-psd/1/query?net=TA&sta=TUL3&loc=01&cha=HHZ&quality=M&starttime=2017-08-01T04:00:00&endtime=2017-08-01T12:00:00&format=plot&plot.power.min=-200&plot.power.max=-70&nodata=404

http://service.iris.edu/mustang/noise-psd/1/query?net=TA&sta=TUL3&loc=01&cha=HHZ&quality=M&starttime=2017-08-01T04:00:00&endtime=2017-08-01T12:00:00&correct=true&format=plot&plot.power.min=-200&plot.power.max=-70&nodata=404


***************************************
Noel Barstow
barstow<at>passcal.nmt.edu

IRIS/PASSCAL Instrument Center, New Mexico Tech
100 East Rd.
Socorro, New Mexico 87801

Tel: office 575-835-5077 or main 575-835-5070
FAX: 575-835-5079