Thread: record section plot options

Started: 2020-08-31 15:43:31
Last activity: 2020-09-01 10:54:23
Topics: Wilber Help
Jeffrey Johnson
2020-08-31 15:43:31
Dear IRIS,

Is it possible to plot a quick record section for a featured earthquake and
suppress the phase picks? Is it possible to filter the waveforms in the
record section.

I seem to remember being able to do this in the past.

Thanks, -J

--
--
Dr. Jeffrey B. Johnson (Office: 3157 ERB; Lab: 3112 ERB)
Associate Professor of Geophysics
Department of Geosciences
Boise State University
1910 University Drive
Boise, ID 83725-1535

jeffrey.b.johnson at gmail.com
website https://sites.google.com/a/boisestate.edu/jeffrey-johnson/

  • Adam Clark (Legacy)
    2020-09-01 09:45:20
    Hi Jeffrey,

    There's not currently a way to screen out the phases, but this is an interesting idea and it might be relatively easy to do, so I'll look into it.

    The only filter for the waveforms within the record section is the option to hide the station if no data is found. Beyond that, it operates on the selected rows in the table, so that would be the place to make changes.

    The ability to tweak the selection from the record section has been a long-standing request, but it gets complicated. Even the simplest version -- rather than hiding a station if no data is found, just remove it entirely from the underlying request -- gets hung up by the fact that the record section only shows one channel, so missing that one channel doesn't necessarily mean that the entire station is missing.

    Cheers,
    Adam

    ----------------------
    Adam Clark
    Web Developer / Admin
    IRIS Data Management Center
    adam<at>iris.washington.edu



    On Sep 1, 2020, at 9:29 AM, Jeffrey Johnson (via IRIS) <wilber-help-9141.60209-bounce<at>lists.ds.iris.edu> wrote:

    Dear IRIS,

    Is it possible to plot a quick record section for a featured earthquake and suppress the phase picks? Is it possible to filter the waveforms in the record section.

    I seem to remember being able to do this in the past.

    Thanks, -J

    --
    --
    Dr. Jeffrey B. Johnson (Office: 3157 ERB; Lab: 3112 ERB)
    Associate Professor of Geophysics
    Department of Geosciences
    Boise State University
    1910 University Drive
    Boise, ID 83725-1535

    jeffrey.b.johnson at gmail.com http://gmail.com/
    website https://sites.google.com/a/boisestate.edu/jeffrey-johnson/

    ----------------------
    Wilber Help
    Topic home: http://ds.iris.edu/message-center/topic/wilber-help/ | Unsubscribe: wilber-help-unsubscribe<at>lists.ds.iris.edu

    Sent from the IRIS Message Center (http://ds.iris.edu/message-center/)
    Update subscription preferences at http://ds.iris.edu/account/profile/


    • Jeffrey Johnson
      2020-09-01 10:54:23
      Thanks for your quick response. I use record section viewing in my
      introductory geophysics classes and find the ability to plot waveforms very
      illustrative.

      Best, -J

      On Tue, Sep 1, 2020 at 10:46 AM Adam Clark (via IRIS) <
      wilber-help-9144.76248-bounce<at>lists.ds.iris.edu> wrote:

      Hi Jeffrey,

      There's not currently a way to screen out the phases, but this is an
      interesting idea and it might be relatively easy to do, so I'll look into
      it.

      The only filter for the waveforms within the record section is the option
      to hide the station if no data is found. Beyond that, it operates on the
      selected rows in the table, so that would be the place to make changes.

      The ability to tweak the selection from the record section has been a
      long-standing request, but it gets complicated. Even the simplest version
      -- rather than hiding a station if no data is found, just remove it
      entirely from the underlying request -- gets hung up by the fact that the
      record section only shows one channel, so missing that one channel doesn't
      necessarily mean that the entire station is missing.

      Cheers,
      Adam

      ----------------------
      Adam Clark
      Web Developer / Admin
      IRIS Data Management Center
      adam<at>iris.washington.edu



      On Sep 1, 2020, at 9:29 AM, Jeffrey Johnson (via IRIS) <
      wilber-help-9141.60209-bounce<at>lists.ds.iris.edu> wrote:

      Dear IRIS,

      Is it possible to plot a quick record section for a featured earthquake
      and suppress the phase picks? Is it possible to filter the waveforms in
      the record section.

      I seem to remember being able to do this in the past.

      Thanks, -J

      --
      --
      Dr. Jeffrey B. Johnson (Office: 3157 ERB; Lab: 3112 ERB)
      Associate Professor of Geophysics
      Department of Geosciences
      Boise State University
      1910 University Drive
      Boise, ID 83725-1535

      jeffrey.b.johnson at gmail.com
      website https://sites.google.com/a/boisestate.edu/jeffrey-johnson/

      ----------------------
      Wilber Help
      Topic home: http://ds.iris.edu/message-center/topic/wilber-help/ |
      Unsubscribe: wilber-help-unsubscribe<at>lists.ds.iris.edu

      Sent from the IRIS Message Center (http://ds.iris.edu/message-center/)
      Update subscription preferences at http://ds.iris.edu/account/profile/



      ----------------------
      Wilber Help
      Topic home: http://ds.iris.edu/message-center/topic/wilber-help/ |
      Unsubscribe: wilber-help-unsubscribe<at>lists.ds.iris.edu

      Sent from the IRIS Message Center (http://ds.iris.edu/message-center/)
      Update subscription preferences at http://ds.iris.edu/account/profile/



      --
      --
      Dr. Jeffrey B. Johnson (Office: 3157 ERB; Lab: 3112 ERB)
      Associate Professor of Geophysics
      Department of Geosciences
      Boise State University
      1910 University Drive
      Boise, ID 83725-1535

      jeffrey.b.johnson at gmail.com
      website https://sites.google.com/a/boisestate.edu/jeffrey-johnson/

06:46:27 v.01697673