Thread: area-filled seismograms

Started: 2012-09-24 21:55:03
Last activity: 2012-09-25 22:00:15
Topics: SAC Help
Aderson Nascimento
2012-09-24 21:55:03
Dear SAC users,

does anybody knows how to make colour filled seismograms? Say, positive
values filled with red and negative with white or some other colour...

Best regards and thanks in advance,

Aderson


Aderson Farias do Nascimento
Universidade Federal do Rio Grande do Norte
Department of Geophysics
UFRN - Campus Universitário, 3000- Lagoa Nova
Cep 59072-970 - Natal RN - Brasil

Tel: + 55 84 3342-2502, r. 209
Cel:+ 55 84 9193-6423
http://lattes.cnpq.br/8600906973888297

  • Januka Attanayake
    2012-09-24 18:13:28
    You can use GMT to do it. Look at function pswiggle. You have to run the program twice, once for + wiggles (red) and once for - wiggles (blue). I usually convert .SAC to required format using matlab routines of Mike Thorne (rsac.m and lh.m): http://web.utah.edu/thorne/software.html

    There is an active thread on pssac.c written by Lupei Zhu in this list, which you can follow.

    Januka.
     
    _______________
    Serenity isn't freedom from the storm, but peace within the storm

    Januka Attanayake 
    Earthquake Seismology & Economics
    The University of Connecticut
    354, Mansfield Road
    Storrs, CT 06269-2045
    Tel:860 486 3914 (Lab - P405)

    Home page: http://sites.google.com/site/janukaattanayake/
    Research group: http://www.phys.uconn.edu/research/geophysics/index.html








    ________________________________
    From: Aderson Farias do Nascimento <nascimentoafd<at>gmail.com>
    To: sac-help<at>iris.washington.edu
    Sent: Monday, September 24, 2012 1:55 PM
    Subject: [SAC-HELP] area-filled seismograms


    Dear SAC users,

    does anybody knows how to make colour filled seismograms? Say, positive values filled with red and negative with white or some other colour...

    Best regards and thanks in advance,

    Aderson


    Aderson Farias do Nascimento
    Universidade Federal do Rio Grande do Norte
    Department of Geophysics
    UFRN - Campus Universitário, 3000- Lagoa Nova
    Cep 59072-970 - Natal RN - Brasil

    Tel: + 55 84 3342-2502, r. 209
    Cel:+ 55 84 9193-6423
    http://lattes.cnpq.br/8600906973888297


    _______________________________________________
    sac-help mailing list
    sac-help<at>iris.washington.edu
    http://www.iris.washington.edu/mailman/listinfo/sac-help
  • John Stockwell
    2012-09-24 21:26:10
    You can use the pswigb or pswigp in the CWP/SU:Seismic Un*x (SU) package.

    -John Stockwell

    Dear SAC users,

    does anybody knows how to make colour filled seismograms? Say, positive
    values filled with red and negative with white or some other colour...

    Best regards and thanks in advance,

    Aderson


    Aderson Farias do Nascimento
    Universidade Federal do Rio Grande do Norte
    Department of Geophysics
    UFRN - Campus Universitário, 3000- Lagoa Nova
    Cep 59072-970 - Natal RN - Brasil

    Tel: + 55 84 3342-2502, r. 209
    Cel:+ 55 84 9193-6423
    http://lattes.cnpq.br/8600906973888297




    John Stockwell | john<at>dix.Mines.EDU
    Center for Wave Phenomena (The Home of Seismic Un*x)
    Colorado School of Mines
    Golden, CO 80401 | http://www.cwp.mines.edu/cwpcodes
    voice: (303) 273-3049

    Our book:
    Norman Bleistein, Jack K. Cohen, John W. Stockwell Jr., [2001],
    Mathematics of multidimensional seismic imaging, migration, and inversion,
    (Interdisciplinary Applied Mathematics, V. 13.), Springer-Verlag, New York.

  • George Helffrich
    2012-09-25 14:23:59
    Dear All -

    MacSAC implements the command LINE FILL RED/GREEN that does this for every waveform display in SAC (screen, sgf, ...).

    On 24 Sep 2012, at 18:55, Aderson Farias do Nascimento wrote:

    Dear SAC users,

    does anybody knows how to make colour filled seismograms? Say, positive values filled with red and negative with white or some other colour...

    Best regards and thanks in advance,

    Aderson


    Aderson Farias do Nascimento
    Universidade Federal do Rio Grande do Norte
    Department of Geophysics
    UFRN - Campus Universitário, 3000- Lagoa Nova
    Cep 59072-970 - Natal RN - Brasil

    Tel: + 55 84 3342-2502, r. 209
    Cel:+ 55 84 9193-6423
    http://lattes.cnpq.br/8600906973888297

    _______________________________________________
    sac-help mailing list
    sac-help<at>iris.washington.edu
    http://www.iris.washington.edu/mailman/listinfo/sac-help



    George Helffrich
    george.helffrich<at>bris.ac.uk


    • Aderson Nascimento
      2012-09-25 22:00:15
      Dear George,

      thank for the help.

      Regards,

      Aderson

      2012/9/25 George Helffrich <george.helffrich<at>bristol.ac.uk>

      Dear All -

      MacSAC implements the command LINE FILL RED/GREEN that does this for every
      waveform display in SAC (screen, sgf, ...).

      On 24 Sep 2012, at 18:55, Aderson Farias do Nascimento wrote:

      Dear SAC users,

      does anybody knows how to make colour filled seismograms? Say, positive
      values filled with red and negative with white or some other colour...

      Best regards and thanks in advance,

      Aderson


      Aderson Farias do Nascimento
      Universidade Federal do Rio Grande do Norte
      Department of Geophysics
      UFRN - Campus Universitário, 3000- Lagoa Nova
      Cep 59072-970 - Natal RN - Brasil

      Tel: + 55 84 3342-2502, r. 209
      Cel:+ 55 84 9193-6423
      http://lattes.cnpq.br/8600906973888297

      _______________________________________________
      sac-help mailing list
      sac-help<at>iris.washington.edu
      http://www.iris.washington.edu/mailman/listinfo/sac-help




      George Helffrich
      george.helffrich<at>bris.ac.uk



00:51:18 v.b4412d20