[webservices] dataselect wrong data returned to multithreaded client

Anthony Lomax alomax at free.fr
Wed Jul 18 00:15:55 PDT 2012


Hello Bruce,

Thanks for the information and quick fix.  I have checked a few traces 
and all show correctly the Z component inclination.

Great!

Ciao,

Anthony

On 2012/07/17 20:10, Bruce Weertman wrote:
> Anthony:
>
> Thanks for pointing out the problem with the incorrect component incident angles.
>
> This problem was caused by a typo in the source code for the ws-tracedsp webservice.
> Buried in the code, "depth" was being used instead of "dip" !
>
> Sorry about that.
>
> The problem has been fixed in the new version of ws-tracedsp (1.4.5) which is now in production.
> This in turn fixes the problem win ws-timeseries.
>
> There is no reason to believe that this issues is related to the problem that Philip Crotwell reported (see below).
>
> Please note:  cached data on our side may continue to report incorrect values for the hour until the cache is flushed out.
>
> Cheers,
>
> Bruce Weertman
>   
> --------------------------------------
> Software Engineer
> IRIS DMC
> 1408 NE 45h St, Suite 201
> Seattle, WA 98105
>
> bruce at iris.washington.edu
> (206) 547-0393
>
>
> On Jul 17, 2012, at 12:51 AM, Anthony Lomax wrote:
>
>> Hi all,
>>
>> I see a possibly related problem with channel inclination.  The following request should return a BHZ channel, but the component inclination in the sac header is 90.0 - my understanding from the SAC manual is that this should be 0.0 for Z component UP:
>>
>> CMPINC     F     Component incident angle (degrees from vertical).
>>
>> http://www.iris.edu/ws/timeseries/query?net=IU&sta=MAKZ&loc=00&cha=BHZ&start=2012-07-17T07:28:26.02&dur=844&output=sacbl
>>
>> Part of the sac header.
>>
>> CMPAZ = 0.0
>> CMPINC = 90.0
>> KSTNM = MAKZ
>> KCMPNM = BHZ
>> KNETWK = IU
>>
>> Thanks,
>>
>> Anthony
>>
>>
>> On 2012/07/16 22:29, Philip Crotwell wrote:
>>> Hi
>>>
>>> I have been doing some tests with the dataselect web service from a
>>> multithreaded client (SOD) and found that occasionally I would get
>>> data records back in one thread that were not the channel asked for.
>>> Luckily I had a check in place from some earlier issues that compared
>>> the channel codes in the request with those in the result. Here is an
>>> example. It appears that the thread that requested data from BORG got
>>> data from ARU.
>>>
>>>
>>> 2012-07-16 15:51:26,794 - Channel id in returned seismogram doesn not
>>> match channelid in request.
>>> req=II.1986-01-01T00:00:00.000GMT.BORG.00.BHZ.2003-08-29T00:00:00.000GMT
>>> seis=II.1986-01-01T00:00:00.000GMT.ARU.00.BHZ.2003-08-29T00:00:00.000GMT
>>>
>>> The request, if it helps, was
>>> net=II&sta=BORG&loc=00&cha=BHZ&start=2009-05-16T01:08:44&end=2009-05-16T01:26:26
>>>
>>> This is a bit scary as I suspect many clients do not check the
>>> returned data to make sure it actually corresponds to their original
>>> request. I have not seen this with a single threaded client, so
>>> perhaps that is a clue.
>>>
>>> I will try to do some more testing and see if I can provide any more details.
>>>
>>> thanks,
>>> Philip
>>> _______________________________________________
>>> webservices mailing list
>>>
>>> webservices at iris.washington.edu
>>> http://www.iris.washington.edu/mailman/listinfo/webservices
>>>
>>>
>>>
>> -- 
>> Sent from my iClayTablet
>>
>>
>>     Anthony Lomax
>>     161 Allée du Micocoulier, 06370 Mouans-Sartoux, France
>>     tel: +33 (0)4 93 75 25 02    e-mail: anthony at alomax.net    web: http://www.alomax.net
>>
>>     Science & Special Topics: http://www.alomax.net/science
>>     ALomax Scientific: http://www.alomax.net/alss
>>
>>
>> _______________________________________________
>> webservices mailing list
>> webservices at iris.washington.edu
>> http://www.iris.washington.edu/mailman/listinfo/webservices
>
>
> _______________________________________________
> webservices mailing list
> webservices at iris.washington.edu
> http://www.iris.washington.edu/mailman/listinfo/webservices
>

-- 
Sent from my iClayTablet

------------------------------------------------------------------------

*Anthony Lomax*
*161 Allée du Micocoulier, 06370 Mouans-Sartoux, France*
*tel: +33 (0)4 93 75 25 02 e-mail: anthony at alomax.net 
<mailto:anthony at alomax.net>    web: http://www.alomax.net 
<http://www.alomax.net/> *

*Science & Special Topics: * *http://www.alomax.net/science*
*ALomax Scientific: * *http://www.alomax.net/alss*
------------------------------------------------------------------------


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.iris.washington.edu/pipermail/webservices/attachments/20120718/22ac82a1/attachment.htm>


More information about the webservices mailing list